Diagrama Elétrico; Routine Inspection; Consejos Generales; Operation - Skymsen EXI Manual De Instrucciones

5.2 Diagrama Elétrico
Llave Prende/Desliga

6. CONSEJOS GENERALES

- Do not wear loose fitting clothes while operating the unit. Do not use bracelets or any other piece of jewelry. Have
your hair always shortened and held up (use hair fishnets if necessary) in a way it cannot reach any part of the machine.
Roll up any loose sleeves.
- SKYMSEN is not responsible for any harm or injury caused by the negligent or inappropriate use of this equipment by
any operator. This equipment must be operated only by persons whose age equals or exceeds 18 years old, in a safe and
sound state of mind, free from the influence of any kind of drugs and alcohol, that received proper training and
instructions regarding the correct operation of this machine, that are wearing correct and authorized safety clothes. All
and any kind of modifications carried on and applied to this machine immediately nullifies any kind of warranty and
may result in harm and injuries to the individuals operating this machine and to individuals that are located in the
machine surrounding areas while it is being operated.
- Under no circunstances place your hands in the moving parts of the machine while it is being used. Make sure the
machine has come to a complete stop before acessing the processed ingredients.
19

4.3 Routine Inspection

4.3.1 Advice
introduce your fingers between the belts and the pulleys and nor
between the chain and the gears.
4.3.2 Precautions
Motor
abnormal noises.
belt or chain show signs of being worn out.
fingers between belts and pulleys, nor between the chains and gears.
Check protections and safety devices to make sure they are working
properly.

4.4 Operation

4.4.1 Advice
turning parts which could lead to a serious accident. Tie your hair well up
and/or cover your head with a scarf.
forbidden.
perfect conditions.

4.5 After Finishing The Work

4.5.1 Precautions
socket before cleaning the machine.
STOP.
turning it ON again.
pulleys nor chains and gears.
When checking the tension of the belts or chains, DO NOT
Check if motors and sliding or turning parts of the machine produce
Check the tension of the belts and chains and replace the set when
When checking tensions of belts or chain DO NOT introduce your
Be sure your hair is not loose in order to avoid getting caught by
The operation performed by not trained or skilled personnel shall be
Never touch turning parts with your hands or in any other way.
NEVER operate machine without all original safety devices under
Always TURN THE MACHINE OFF by removing the plug from the
Never clean the machine unless it has come to a COMPLETE
Put all components back to their functional positions before
DO NOT place your fingers in between belts and
08