Basic Configuration; Password Confi Guration; Wan Setup - Fermax LYNX Manual De Instalador

5.1 BASIC CONFIGURATION

This section is used for the basic settings such as changing the administration password.
- Password confi guration
You can change the default password to improve the device security.
In order to change the default password you need to fi rst type the old password correctly. It's strongly recommended to change default password for security reasons, and to use
a different one on each installation.
5.2 AJUSTES DE RED
This section allows the confi guration of network settings such as changing local
confi guration, WAN confi guration of Dynamic DNS.

- WAN setup

Depending on the installer´s preferences, the device can be confi gured to work in LYNX
mode, the router has an IP on the LYNX subnet 10.206.0.X or in static mode, allowing
the installer to assign a fi xed IP. The router can be assigned a number between 0 and
119. In LYNX mode, the last digit of the IP indicates the router number. For example,
router 50 has IP 10.206.0.50.
This is the dialog box used to confi gure the device type:
6
LYNX ROUTER