Proline PLC 241 Manual De Instrucciones página 33

3. Support the freezer door and remove the central
hinge by removing the two screws.
5. Remove the bottom screws, bottom hinge and
adjustable foot from the bottom of the appliance.
Transfer the foot to the corresponding position
on the opposite side of the bottom.
7. Remove and refit the blank plugs on the
corresponding holes in the middle of the
appliance.
4. Remove the freezer door from the bottom
hinge. Place the freezer door on a padded
surface to prevent it from being scratched.
6. Remove the bottom hinge pin using a spanner.
Turn over the hinge and replace it to the
corresponding position on the opposite side.
8. Carefully set the freezer door back into place.
Ensure the door is aligned horizontally and
vertically so that the seals are closed on all
sides before finally tightening the middle
hinge.
Replace the middle hinge. Do not fully tighten
the screws to make the final adjustments.
13