Tabla de contenido
Idiomas disponibles
Idiomas disponibles
This lubrication should last for the life of the tool. No further lubrication is required.
Use only mild soap and a damp cloth to clean the tool. Never let any liquid get inside the
casing. Never immerse any part of the tool in a liquid. Always keep the ventilation openings clear.
Always clean the battery pack using only a dry cloth. Do not use liquids.
Always unplug the charger before cleaning it.
Regularly clean the ventilation slots in your tool and charger using only a soft
brush or dry cloth.
Never open the Cordless Drill case, battery pack or charger. Do not attempt to repair the
Cordless Drill, battery pack or charger yourself. Opening any of these parts will void your warranty.
Use only accessories that are recommended by the manufacturer for your model.
Accessories that may be suitable for one tool may become hazardous when used on another
tool.
Always attach grounded (3-prong) extension cords to grounded (3-hole) outlets.
If you must use an extension cord, be sure that the gauge is large enough to carry
the amount of current necessary for your power tool. If not, your tool may experience
a loss of power, excessive voltage drop or overheating. The smaller the gauge number, the
heavier the cord (see table).
RECOMMENDED SIZES OF EXTENSION CORDS FOR 120 VOLT AC 60 HZ TOOLS
CURRENT RATING IN AMPS
MORE THAN
NOT MORE THAN
0
6
10
12
MAINTENANCE AND CLEANING
Always remove the battery pack before attempting cleaning
or maintenance.
This Cordless Drill is lubricated before it leaves the factory.
ACCESSORIES
25 FT.
6
18
10
18
12
16
16
14
CONDUCTOR SIZE IN A.W.G.
50 FT.
16
16
16
12
17
100 FT.
150 FT.
16
14
14
12
14
12
NOT RECOMMENDED
Capítulos
Tabla de contenido
