Cleaning Before Use; Space Requirements - Premier NV-5261 Manual De Instrucciones

UNPACKING YOUR REFRIGERATOR-FREEZER
WARNING: Use two or more people to move refrigerator-freezer.Failure to do so can result in
back or other injury.
Remove tape and any labels from your refrigerator-freezer before using(except the rating label).
To remove any remaining tape or glue, rub the area briskly with your thumb.
Tape or glue residue can also be easily removed by rubbing a small amount of liquid dish soap over the
adhesive with your fingers. Wipe with warm water and dry.
Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or
glue. These products can damage the surface of your refrigerator-freezer.
When moving the refrigerator-freezer, do not tilt the refrigerator-freezer beyond 45°from upright position.

CLEANING BEFORE USE

After you remove all of the packaging materials, especially the foam between outside condenser and
cabinet should be removed clean the inside of your refrigerator-freezer before using it.

SPACE REQUIREMENTS

WARNING: Keep flammable materials and vapors, such as gasoline, away form refrigerator-freezer.
Failure to do so can result in death, explosion, fine or burns.
To ensure proper ventilation for your refrigerator-freezer, allow for 200mm space on each side between
walls, 200mm space between back of your refrigerator-freezer and the wall, and 300mm space between
counter top and the roof or ceiling.
If you are installing your refrigerator-freezer next to a fixed wall, leave sufficient space on the hinge side
to allow for the door to swing open.
Never install your refrigerator-freezer near heat source and direct sun shins.
P-4