Performance Problems; Replacement Parts - Powermatic PM2200 Instrucciones De Operación

10.2 Performance problems

Symptom
Poor performance; lack
of suction.
Excess dust or large
chips backing up into
canister filter.

11.0 Replacement Parts

Replacement parts are listed on the following pages. To order parts or reach our service department, call 1-800-
274-6848 Monday through Friday, 8:00 a.m. to 5:00 p.m. CST. Having the Model Number and Serial Number of
your machine available when you call will allow us to serve you quickly and accurately.
Non-proprietary parts, such as fasteners, can be found at local hardware stores, or may be ordered from
Powermatic.
Some parts are shown for reference only, and may not be available individually.
Possible Cause
Hose improperly secured at dust
origination point.
Inlet port is open.
Collection bag is full.
Collection drum not sealed properly.
Canister filter is dirty.
Wood has excess moisture content.
Obstruction in dust hose or inlet port.
Dust hose too long.
Collection drum not sealed properly.
Collection bag full.
Correction
Inspect and remedy.
Cap unused inlet ports.
Empty bag (check sight window).
Inspect drum for leaks, make sure lid is
tight.
Clean filter.
Use lumber with lower moisture content.
Inspect and clear obstruction.
Move collector closer to dust source and
use shorter hose.
Inspect drum for leaks, make sure lid is
tight.
Empty bag (check sight window).
15