Replacing The Batteries - Alecto SA-18 Instrucciones

detectors will lose their functionality.
Maintenance:
The smoke detector is maintenance-free. In very dusty rooms they may be cleaned by
vacuum.
PLAN AN ESCAPE ROUTE:
• Make a map and mark all locations of doors and windows and a possible escape
route. Note that you may need an escape ladder on high floors.
• Ensure everyone in the house knows the sound the smoke alarms produce and
regularly practice use of the escape route.
• Leave the house immediately according to the plan when hearing the alarm. Every
second counts: so respond quickly. If you do not notice smoke or heat, check if
everyone in the house is in a secure location.
• Do not open any doors without feeling wether the door is warm or if there is smoke
coming from underneath the doors. If it is, do not open that door. If the door is cold,
put your shoulder firmly against the door and open it a small amount to check for
any heat or smoke first.
• If there is much smoke, keep low and take shallow breaths, preferably through a
moist towel. Call the fire department as soon as you are safe outside.

REPLACING THE BATTERIES:

The detector is supplied using a 9Volt blok battery. Only use the recommended type
Pairdeer 6F22. Under normal conditions the battery will last at least one year. If it is
about to need replacement, the smoke detector will make a chirping sound every 30 to
40 seconds for at least 30 days. Pay attention to the polarity when replacing batteries.
Test the detector after every battery replacement. If the smoke detector does not
function, please contact your supplier.
ENVIRONMENT:
Do not throw away used batteries, but recycle them using your local chemical
depot. Product may not be thrown out as normal waste, but must be recycled
as electrical waste.
DECLARATION OF CONFORMITY:
Available to download from: www.alecto.nl