Hot Laminating; Important Safety Information - Q-Connect A4 Manual De Instrucciones

1 Ready to laminate sign
2. Pouch in-feed slot
3. On/off button
4. Jam release button (Anti-Blocking System)
5. Pouch outlet
FOR OPTIMAL RESULT WE RECOMMEND USING
Q-CONNECT LAMINATING POUCHES.

HOT LAMINATING

1. Position the laminator on a horizontal surface where there
is enough space to be able to insert a pouch and let it
completely come out of the machine without any obstruction.
2. Connect the power cable to a correctly installed electrical
socket
3. Switch on the power (ON button). When the correct
temperature is reached the "ready to laminate" sign will turn
from black to red. The heating-up time can vary depending on
the ambient temperature and the humidity.
4. When the Ready to laminate sign has turned to red, position
the document between both foils of the pouch. Please make
sure to document is placed as close to the sealed edge as
possible.
5. Insert the laminating pouch containing the document with
the sealed side first into the laminator's in-feed slot which is at
the backside of the machine. The hot rollers will pull it through
the machine and it will come out of the outlet automatically.
Do not violently pull out the laminated pouch
6. After the laminating process, take out the laminated
document gently out of the laminator and let it cool down on
a flat surface for a short while.
7. To switch off the laminator, press the on/off button to the OFF
position.
ABS-LEVER (ANTI-BLOCKING SYSTEM)
This laminator is equipped with an ABS system. In case you would
not have inserted the laminating pouch correctly or if it got
jammed into the machine, please take following steps:
1. Push the ABS lever in the direction of the pouch in-feed slot
and keep it there
2. Pull the laminating pouch with your other hand out of the
machine. It is advisable to pull the pouch out of the machine
on the side where most of the pouch is visible. You can insert
the document into a new laminating pouch and laminate it
again.

IMPORTANT SAFETY INFORMATION

• The laminator can only be operated horizontally on a level
surface indoors in dry rooms with good ventilation.
• The socket-outlet shall be installed near the equipment and
shall be easily accessible.
• Children or pets must be kept away from the laminator during
operation.
• Never touch the top of the device. Risk of burns!
• Never cover the top of the device with anything. Risk of fire!
• Switch off the laminator and disconnect the power plug when
it is not being used.
TROUBLESHOOTING
Laminated pouch is not completely transparent and/or the edge
is not well sealed.
• Wait for a few minutes to get a higher temperature.
• Laminate the same pouch again to improve the lamination
result.
• Use the correct laminating pouches.
DISPOSAL
This symbol (crossed out waste bin) indicates that
the product must be returned to an authorised
recycling centre or collection point when it has
reached the end of its service life. This symbol only
applies in member states of the EEA1.
3
t