Profoon TX-105 Modo De Empleo página 6

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

GB
DECLARATION OF
NETWORKCOMPATIBILITY
The Profoon TX-105 is designed for
use on the 'public switched telephone
networks (analogue single-line)' of
telephone- and cable-companies ins-
ide the EU.
Each country and/or provider might
require a different telephoneplug.
The Profoon TX-105 complies with the
essential requirements and provisions
as described in the European
Directive 1999/5/EC.
DECLARATION OF CONFORMITY
The declaration
of conformity is
available on the
website WWW.PROFOON.COM
INSTALLATION
The TX-105 can be hang on a wall.
1. drill two holes in the wall with a
distance of 10cm and insert two
screws; let the heads of the screws
stick out a few millimeters of the
wall
2. remove the handsetholder, rotate it
180° and replace it; this holder will
hold the handset when wall
mounted.
3. hang the unit on the wall and fixate
the telephone wire by means of
cable-clips
After the telephoneplug is plugged in
a telephone wall-outlet, the TX-105 is
ready for use.
HOW TO USE
INCOMING CALL:
Adjust the ringer volume with the rin-
ger switch on the handset. Lift the
handset and start the conversation.
The ringer-lamp also indicates an
incoming call.
OUTGOING CALL:
Lift the handset. Wait for the dial tone
and key-in the desired telephone
number. Replace the handset when
the conversation is over.
REDIAL:
In case the person you were calling
was busy or you want to dial the last
dialed number again, this number is
stored in memory:
1. pick up the handset and wait for
the dialtone
2. press the button
number will be redialed
This number can be as long as 32
digits.
6
; the last dialed
Tabla de contenido
loading

Tabla de contenido