Maintenance And Cleaning - VICAIR VECTOR O2 Manual De Usuario

such circumstances, the cushion's firmness
can be adjusted by removing a few cells
from each compartment.
• Air humidity: Minimum: 0%, maximum
100%
Ready for use
This Vicair product is ready for use. It has its
own unique filling grade, depending on size and
model. However – if necessary – the filling
grade can be adjusted by removing or adding
SmartCells from/to the various compartments.
You can find the default filling grade on the
label attached to the cushion.
Daily fluff-up
Vicair B.V. recommends to fluff-up your Vicair
cushion before use on a daily basis.
Use of Vicair seat cushions in motor
vehicles
Warning! No testing data is currently available
about the safe use of Vicair wheelchair cushions
in motor vehicles. Therefore we do not
encourage using the wheelchair cushion in
motor vehicles.
As an alternative for your Vicair wheelchair
cushion, the Vicair AllRounder (which can be
fastened to the user's body) can be used if you
require additional protection during
transportation.
Transferring the product to another user
The product has to be thoroughly cleaned and
disinfected, before another person is allowed to
use the it. See chapter 'Maintenance and
cleaning' for instructions.
Notice! Make sure the product is correctly
adjusted to the other person.
Replacing the cushion cover
Under normal use, Vicair B.V. recommends to
replace the cushion cover every year.
6
Replacement covers can be purchased
separately.

MAINTENANCE AND CLEANING

Warning! Every three months, check the
product for wear and deflated cells. In case of
serious damage, or a large number of deflated
cells, do not continue to use the product.
Consult your dealer.
Caution! Do not steam clean or autoclave the
product. It cannot withstand excessive heat or
pressure. When the given cleaning instructions
are not followed, it is very likely that the
product will age more rapid.
Caution! Do not use aggressive or abrasive
cleaners, or sharp objects to clean the cushion.
Cleaning the Vicair Vector O2
• Cleaning the Vicair Vector O2 cushion
cover
The cushion cover can be machine washed.
Follow the washing instructions on the label
attached to the inside of the cover.
• Cleaning the Vicair Vector O2 cushion
Your Vicair O2 cushion can be machine
washed at 40°C using a gentle cycle and
mild detergent. You do not need to remove
the SmartCells before putting the cushion
into the washing machine. Do not use any
chlorine bleach and do not dry clean! Do not
tumble dry your Vicair O2 cushion but let it
air dry (5-6 hours). You can use the sling to
hang dry your Vicair O2 cushion.
EN