Notas Sobre Los Módulos De Ampliación De E/S Individuales; Indicaciones Ul (Solo Rad-2400-Ifs Y Módulos De Ampliación De E/S) - Phonetics RAD-2400-IFS Manual Del Usuario

Tabla de contenido
RAD-...-IFS
12 / 198
PHOENIX CONTACT
1.6
Notas sobre los módulos de ampliación de E/S in-
dividuales
RAD-DI4-IFS, RAD-DOR4-IFS, RAD-DAIO6-IFS
ADVERTENCIA: ¡Peligro por descarga eléctrica!
Emplee la misma fase para las entradas y salidas digitales. La tensión de separación en-
tre los diferentes canales no puede superar 300 V.
RAD-AO4-IFS
Emplee por cada canal analógico la salida de corriente o la salida de tensión.
1.7
Indicaciones UL (solo RAD-2400-IFS y módulos de
ampliación de E/S)
Módulo inalámbrico RAD-2400-IFS
INDUSTRIAL CONTROL EQUIPMENT FOR HAZARDOUS LOCATIONS 45FP
A
This equipment is suitable for use in Class I, Zone 2, IIC T4 and Class I, Division 2,
Groups A, B, C, D T4A hazardous locations or non-hazardous locations only.
B
WARNING - EXPLOSION HAZARD - DO NOT DISCONNECT EQUIPMENT UN-
LESS POWER HAS BEEN SWITCHED OFF OR THE AREA IS KNOWN TO BE
NON-HAZARDOUS.
C
WARNING - EXPLOSION HAZARD - SUBSTITUTION OF COMPONENTS MAY
IMPAIR SUITABILITY FOR CLASS 1, DIVISION 2.
D
These devices are open-type devices that are to be installed in an enclosure suita-
ble for the environment that is only accessible with the use of a tool.
E
WARNING - Exposure to some chemicals may degrade the sealing properties of
materials used in relays within this device.
F
WARNING - EXPLOSION HAZARD - S-PORT IS FOR MAINTENANCE AND
PROGRAMMING ONLY AND SHOULD ONLY BE USED WHEN THE AREA IS
KNOWN TO BE NON-HAZARDOUS.
Módulos de ampliación de E/S
INDUSTRIAL CONTROL EQUIPMENT FOR HAZARDOUS LOCATIONS 45FP
A
This equipment is suitable for use in Class I, Zone 2, IIC T4 and Class I, Division 2,
Groups A, B, C, D T4A hazardous locations or non-hazardous locations only.
B
WARNING - EXPLOSION HAZARD - DO NOT DISCONNECT EQUIPMENT UN-
LESS POWER HAS BEEN SWITCHED OFF OR THE AREA IS KNOWN TO BE
NON-HAZARDOUS.
C
WARNING - EXPLOSION HAZARD - SUBSTITUTION OF COMPONENTS MAY IM-
PAIR SUITABILITY FOR CLASS 1, DIVISION 2.
D
These devices are open-type devices that are to be installed in an enclosure suitable
for the environment that is only accessible with the use of a tool.
E
WARNING - Exposure to some chemicals may degrade the sealing properties of ma-
terials used in relays within this device.
105542_es_05
Tabla de contenido
loading

Tabla de contenido