Functional Features / Technical Data - Gewiss GW 10 861 Manual De Uso

FUNCTIONAL FEATURES / TECHNICAL DATA

Model:
Protection grade:
Power supply:
Min/ Max voltage
Low battery Voltage
Absorptions 9V:
Front LED indicators:
LEDs excluded:
Alarm integration:
Capacity, coverage, sensitive areas: See the diagrams for the lens provided.
Timer:
Sensor inhibition:
Tamper:
TX Frequency:
Range:
Autonomy:
NOTE:
Working temperature:
ONE Plaque dimensions:
LUX Plaque dimensions:
Equipment:
The GW 10/12/14 861 - GW 10/12/14 866 sensor is an accessory for compatible devices with EC
markings; it complies to ETSI-300 220 Directive, to 89/336/CEE Standards relative to electromagnetic
compatibility and to the 93/68/CEE Standard regarding low voltage safety.
GW 10/12/14 861 - GW 10/12/14 866
IP3X
n° 3 AAA 1,5 V alkaline batteries.
3 V / 4,5 V
3,7 V
16 µA when idle, 20 mA at TX peak.
Walk-test, alarm and low battery.
DIP switches for WALK-TEST, flat battery and alarm.
Using the DIP switched selectable between
2 or 4 impulses in 8 seconds.
Constant movement inhibition, 5 minutes quiet after
an alarm, with the WALK-TEST DIP switch activated,
the transmission inhibition time is reduced to 30 seconds.
About one minute delay when first switched on.
Protection against removal of the detector from the wall
and removal of the plaque.
Digital transmission on a LPD frequency.
50 metres in free-field conditions.
2,5 years
With indicators enabled the autonomy is reduced by at
least 10%, the flat battery signal is generated at 2/3
of the sensor's autonomy.
from -10°C to + 45°C - 93 % Ru.
L118 x H90 x P40 mm
L123 x H90 x P40 mm
screws, expansion bolts, two-component adhesive for
fixing and kit tamper-proof magnet.
42