Pinfinder - GPO Flagmaster 1800 Instrucciones De Uso

PinFinder

Your FLAGMASTER has a PinFinder which allows you
to specifically range the flag. Some courses use a
retroreflector or prism mounted on the top of the pin.
In PinFinder mode you will see the flag symbol on the
display. Move the target or aiming point of the display
towards the flag or top of the pin and you will feel a
vibration if the vibration is active.
Press and hold the Range button (A) (your FLAGMAS-
TER will automatically enter Scan mode). Carefully
TM
move the aiming point over the flag or prism to while
the Range Button is held down. If you have locked in
on the flag or prism a circle will appear around the
flag icon and you will feel a vibration if the vibration
is active and in the display confirming you have a pin
lock. Upon release of the range button, the distance
will be displayed for 10 seconds.