Electrical Hazards; Components/Subsystems; Care And Storage; Labels/Identification/Inspection Records - Werner UPGEAR Manual De Instrucciones Para El Usuario

ROPE LIFELINE SYSTEM
corrosion damage is not affecting the performance of the
product.
2. CHEMICAL HAZARDS: Solutions containing acids, alkali, or
other caustic chemicals, especially at elevated temperatures,
may cause damage to this equipment. When working with
such chemicals, frequent inspection of this equipment must be
performed. Consult Werner Co. if doubt exists concerning using
this equipment around chemical hazards.
3. HEAT: This equipment is not designed for use in high temperature
environments. Protection should be provided for this equipment
when used near welding, metal cutting, or similar activities. Hot
sparks may burn or damage this equipment. Consult Werner
Co. for details on high temperature environments.
4. ELECTRICAL HAZARDS: Due to the possibility of electric
current flowing through this equipment or connecting
components, use extreme caution when working near high
voltage power lines.
f. Components/Subsystems
Before first use, a qualified person should inspect and determine that
all components and subsystems are compatible and will perform
correctly when combined into a complete personal fall protection
system. Consult the information in these instructions, and if any
additional information is needed contact Werner Co. directly.
g. Care and Storage
Store in a cool, dry place, protected from exposure to any direct
light.
V. labels/Identification/Inspection Records
a. All products should be inspected by the user thoroughly before
each use. Additional inspections by a competent person other than
the user should be conducted at intervals of no less than one year.
That interval should be shortened any time the product is used in a
harsh environment or is exposed to conditions such as chemicals,
abrasion, heat or any other factor that could affect the strength of
any of the materials or components.
b. The product labels provide an inspection grid to record these
inspections by a competent person. Use a punch or permanent
marker to record those dates.
USER INSTRUCTIONS
Page 11