Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Before starting, be sure chuck key is removed
•
table are locked.
Never start the drill press
•
Adjust the table or depth stop
•
When using a drill press vise,
•
Do not operate in rain or in damp locations.
•
grounding required.
•
KNOWINg YOUr 10" DrILL PrESS
15
7
1. Pulley Housing Cover
2. Motor
3. oN/off Switch
4. Chuck
5. Spindle
6. Crank Handle
7. Table Support Lock Handle
6
when the bit or other cutting tool is in contact with the work piece.
to avoid drilling into the table.
always fasten the vise to the table.
SAVE THESE INSTRUCTIONS
16
17
14
20
19
8. Table
9. Table Support
10. Column
11. Column Support
12. feed Handle
13. Tension Lock Screw
14. Motor Pulley
10" Drill Press
Operator's Manual
from the chuck and the motor head and
3
18
5
4
8
10
21
15. Spindle Pulley
16. Middle Pulley
17. Belt
18. Depth Scale
19. Bevel Scale
20. feed Return Spring and Cover
21. Base
GDP1012A
1
2
13
12
6
9
11
FIG 1
Tabla de contenido
