Prestigio Multicam 575w Guia De Inicio Rapido página 6

Motion detector setup
•
If there is any motion detected while the car engine is stopped, your car DVR
will start recording automatically. It will stop recording when no motion can be
detected.
(1) Run MultiCam Prestigio.
(2) Go to Setup > Car DVR Settings to turn on Motion Detector, and then tap
Save.
(3) displays on your car DVR.
Notes:
When car engine is stopped, use the car DVR to activate Motion Detector if
•
necessary.
G-sensor setup
•
If any impact takes place during recording, your car DVR will save the emergency
recording events and save the files automatically. You just need to turn on the
G-sensor.
(1) Run MultiCam Prestigio.
(2) Go to Setup > Car DVR Settings.
(3) Choose H/L for G-Sensor and then tap Save.
» H: High sensitivity. L: Low sensitivity.
(4) The car DVR shows emergency record notification on the screen.
Connects to cloude server
•
Enable Cloud [
Connecting status will show on the screen.
Status
] in the car DVR to sync video recording to a cloud server.
Description
The connection is successful. The preview shows [
and the car DVR ID.
Login fail:
• Invalid AP name or password.
• Weak Wi-Fi signal or not in Wi-Fi coverage.
Connection fail:
• No Internet or cloud server accessible.
• Blocked by a firewall.
Quick Start Guide
Prestigio MultiCam
]