Prestigio Multicam 575w Guia De Inicio Rapido página 2

Note:
After inserting the micro-SD card, the device will automatically
recognize it as the default storage, and all the data will be saved on this card.
4. Charging
Using the USB cable: Connect the device to the USB port of a PC/notebook.
•
Using the car charger: Connect the device to the car charger. The device will
•
start charging after you start your car engine. The device will automatically turn
on and begin recording. When the engine stops, the device will automatically
save the latest file and turn off.
Note:
Before using the device for the first time, please use the included USB cable to
connect it to a PC or notebook to fully charge the battery. It takes 2-3 hours for
the charging to complete.
5. Power on/power off
Mount the device in the vehicle by using the car mount, and then press the
•
power button to turn it on. To power off the device, press and hold the power
button for 2 seconds.
You can also connect the device to the car charger. It will automatically turn on
•
and start recording when the car engine starts.
6. Recording
Connect the device to the car charger, when the car engine starts, the device
•
will start and loop recording after 5 seconds. When the car engine stops, the
device will save the latest file and turn off after 15 seconds.
Note:
(1) Press [ ] on loop recording, the current file will be saved and the device
enters standby mode.
(2) When the micro SD card is full, the device will delete the first unlocked video
file automatically.
Settings
7. Camcorder operation
In preview mode, press [
the menu.
8. Settings menu
The car DVR has eight settings. Advanced settings can be set up via the Prestigio
mobile control app.
] to enter settings. Use [
Quick Start Guide
Prestigio MultiCam
]/[ ] to navigate