2. Plug other end of power cable into a standard electrical wall outlet.
3. The charging indicator will normally be red or yellow at this point.
4. Allow batteries to charge until chargin indicator turns green.
The meter gives an approximation of battery strength. Three coloured lights illuminated indicate batteries are fully charged. When only the red light remains
OPERATING YOUR SCOOTER
• Free-wheeling device on D
• Speed control knob All 5 LED for is at the turtle picture.
3. When your hands rest comfortably on the handlebars, the thumb control levers should be within easy reach. The right lever moves the scooter forward, the
left one moves it backward. When you release both levers the scooter will stop.
4. Practice driving where there are no obstacles. Start at the slowest.
DISASSEMBLIG YOUR SCOOTER
The scooter is easy to disassembly and ou can transport it by car. Tools are not neccessary. To assemble the scooter, you can repeat the disassembly direc-
tions in reverse.
2. Remove Rear Shroud ou the Scooter
7. There are 5 main parts after disassembling the scooter