Instructions; Activated Charcoal Installation; Pour Water Into The Stainless Steel Tank; Starting Up - Mocom Stillo Manual De Uso

User Manual
INSTRUCTIONS
ACTIVATED CHARCOAL
INSTALLATION
POUR WATER INTO THE
STAINLESS STEEL TANK
STARTING UP
STORE THE DISTILLED
WATER
6
1. Fit the active carbon filter into the nozzle (fig. A).
2. Fit the nozzle into the head seat (fig. B).
3. To replace the filter, remove the nozzle working in the direction shown
by the arrow (fig. C).
E
ACH ACTIVATED CHARCOAL SACHET CAN BE USED FOR UP TO A MONTH
fig. A
Use hot/cold water to fill the tank and make sure that you do not go beyond
the full line. If you use hot water, you can shorten the time needed to distil
water.
Secure the upper cover and plug the power cord into the socket on the
body. Place the collection bottle and the protective cover in a secure place
and make sure they are leveled. Plug the power cord into the outlet and
turn on the power switch
WHEN FIRST USED THE SWITCH IS
AUTOMATICALLY SET IN THE
SO THERE IS NO NEED TO SWITCH IT ON FOR
THE VERY FIRST USE
You will start the process when turn the switch
on and it will shut off automatically at the end
of the process. If you wish to terminate the
process, unplug the power line from the outlet.
The power supply is turned off automatically
when distillation is completed. Approximately
an hour after you have turned on the power
switch, the distilled water begins to drip down
into the collection bottle. It takes six hours to distil four litres of water.
When the power supply is cut off, you may move onto the next tank
immediately.
For proper storage, place the distilled water into sealed containers and
store them in a cool and light‐protected room.
fig. B
" " ,
ON POSITION
.
).
fig. C
Power cord
Power cord
Body sochet
sochet
Stillo