Inserting The Batteries - Peg-Perego Prima Pappa Dondolino Instrucciones De Uso

the high chair, lift it to adjust it to one of the
seven diff erent heights, as shown in the fi gure. To
put the high chair back into the packing position,
see the instructions below.
BRAKE
12• The high chair has four swivel wheels, with brakes
on two of them. To brake the high chair, lower the
little brake levers on the rear wheels. To release
the brakes, lift the levers. For your convenience,
always make sure the brakes are set before
carrying out any other operation on the high chair.
TRAYS
Dondolino comes with 2 trays: a small tray for the
rocking-chair, and a large tray for mealtimes.
13• To attach the rocking-chair tray, place it in the
position shown in fig. A. Push the tray all the way
in, turning the knob under the tray at the same
time (fig. B). To remove the tray, carry out the
instructions in the reverse order.
14• To attach the mealtime tray, hook the back part
of the tray onto the high chair first, as shown in
fig. A. Press the red button under the tray and pull
the lever, while fastening the front part of the tray
(fig. B). To remove the tray from the high chair,
follow the instructions in the reverse order.
15• Both trays can be adjusted to two different
positions (1 & 2) by turning the knob under the
tray counterclockwise. Position 3 is used only to
fold the trays up.
SAFETY BELT
16• Make sure that the shoulder strap is correctly
inserted, by pressing on it, as shown in figure A.
Fasten the lap belt as shown in figure B.
17• To unfasten the safety belt, press the sides of the
buckle (fig. A) while pulling the lap belt outwards
(fig. B).
18• The shoulder straps can be adjusted to two diffe-
rent heights. Unfasten the safety belt from behind
the backrest by pushing the buckle downwards
(fig. A). Slip the safety belt out of the sack (fig. B).
19• Next, slip the safety belt buckle through the other
opening in the backrest (fig. A), and fasten the
buckle to the peg, pulling the safety belt until it
clicks into place (fig. B).
7 HEIGHTS
The high chair adjusts to 7 different heights.
20• To lift the high chair, hold it under the tray and
pull upwards.
21• To lower the high chair, simultaneously press the
two side buttons, stopping at the desired height.
These operations can be carried out with the child
in the high chair.
RECLINING HIGH CHAIR
22• The high chair reclines, and adjusts to four
different positions: for mealtime, playtime,
relaxing, or napping. To adjust it, lift the handle
behind the backrest and set the high chair to the
desired position. This operation can be carried out
with the child in the high chair.
TO FOLD THE HIGH CHAIR
23• To close the tray, turn the knob under the tray
counterclockwise, and pull the tray out as far as
the red markers shown with the arrows in the
figure.
24• Press button nr. 1.
25• Lower button number 2 while lifting the tray (fig.
A). Figure B shows the tray in the closed position.
26• Move the high chair seat to the lowest position by
pressing the side buttons. Lift the backrest to the
upright position, and close the footrest.
27• Lift the handle on the back of the high chair (fig.
A) to completely fold the chair up. The high chair
stands upright when closed (fig. B).
TO OPEN THE HIGH CHAIR
• To open the high chair, push the red side levers
downwards, pressing on the rear frame as shown
in fi gure 8. Press until the high chair clicks open.
28• To open the tray, press only button 2. Lower the
tray as shown in the figure.
REMOVING THE HIGH CHAIR COVER
29• To remove the high chair cover, remove the safety
belt from under the chair and the backrest.
30• Lower the high chair completely, and unbutton the
cover from the sides of the backrest. Slip the cover
off the top of the high chair.
FOLDING THE HIGH CHAIR BACK UP INTO ITS
PACKING POSITION
• To fold the high chair back up into its "packing
position" (for transporting it or storing it in its
box):
- Remove the tray.
- Return the backrest to the upright position.
- Lower the high chair to the lowest position.
- Close the footrest.
31• A small screwdriver is necessary for this
step. Press the side button while slipping the
screwdriver into the slit. Push to the right.
32• Repeat the same operation, pushing the
screwdriver to the left and lowering the high chair
to the lowest position (the position in which it
cannot be used).
• Fold the high chair up and place it in its box.

INSERTING THE BATTERIES

Batteries ARE NOT SUPPLIED with the high chair.
ELECTRIC ROCKING-CHAIR
To activate the electric rocking-chair option, you
will need four MN 1400-LR14 1.5-Volt, type "C"
flashlight batteries.
33• Using a screwdriver, open the lower part of the
rocker and insert the batteries. Screw the cover
back onto the battery compartment.
MUSIC
To play the high chair melodies, you will need two
MN 1500-LR6 1.5-Volt, type "AA" batteries.
34• Using a screwdriver, open the cover on the battery
compartment located under the footrest, and
insert the batteries. Screw the cover back onto the
battery compartment.
ROCKING - CHAIR OPTION
CAUTION: For the electric rocking-chair option,
attach the rocking-chair tray to the high chair
(remove the mealtime tray), and place the backrest
in the completely lowered position. Dondolino will
work in the electric mode for children weighing up
to 10 kg. It is necessary to adjust the height of the
seat according to the child's weight.
35• The fi gure shows the correct seat height for a
child weighing 4 kg.
36• The fi gure shows the correct seat height for a
child weighing 10 kg.
37• To turn on the rocking-chair option, use the rear
handle and push the crossbar downwards. This
operation can be also carried out with the child in
the seat.
38• Set the crossbar by pressing on it with both hands
until it clicks into place. The rocking-chair works
MANUALLY in this position. This operation can
also be carried out with the child in the seat.
39• To turn on the electric rocking-chair, press the