Noises - AEG A82900GNW1 Manual De Instrucciones

18 www.aeg.com
WARNING!
Reposition, level the appliance,
wait for at least four hours and
then connect it to the power
socket.
Do a final check to make sure that:
• All screws are tightened.

8. NOISES

There are some sounds during normal
running (compressor, refrigerant circula-
tion).
OK
2
1
3
4
• Pull the cable through the hinge (1).
• Screw on the lower hinge with 3 screw
(2).
• Insert the cable holder and screw on
this (3).
• Connect the cable (4) which comes
from the door.
• Use a small screw driver to remove the
bushing on the top of the door and
move it to the opposite side on the
door.
• Install the handle on the opposite
side.
• Raise the appliance and install the
ventilation grill.
• Put the cabinet in position.
• The magnetic seal adheres to the cab-
inet.
• The door opens and closes correctly.
If the ambient temperature is cold (i.e. in
Winter), the gasket may not fit perfectly
to the cabinet. In that case, wait for the
natural fitting of the gasket.
HISSS!
BRRR
!