Accessmatic Viper 350 Manual De Usuario página 38

Opening your life
8. Parameter setting
2. Press and hold the parameter button (set) for 3 seconds
3. Enter to program after the code "Pn00" appears on the screen
4. Press the "+" and "-" buttons to select the program (values between 00 and 31)
5. Press the parameterization button (set) to modify the desired value (the interface
shows the previous value when entering the value).
6. Press the "+" and "-" buttons to adjust the values (maximum and minimum values
will be limited by the software).
7. Press the parameterization button (set) to con rm and save the value to be
entered. The system will return to program selection.
8. You can continue selecting other parameters and set the desired values
according to sections 3,4,5 and 6.
9. Exit programming.
13