Tabla de contenido
Idiomas disponibles
Idiomas disponibles
5. Adjust the desired volume for the audio player with the
level control [MP3 VOLUME]. Additionally, you can use the
buttons [V+] and [V-] on the player (long actuation) or [+] and
[-] on the remote control.
6. To interrupt the playback press the button [PLAY/PAUSE]
on the player or [▶☐] on the remote control. The display in-
dicates "☐". To stop the playback, press the button [☐]. The
display indicates "☐". After pressing the button [PLAY/PAUSE]
or [▶☐], playback will start from the beginning of the title.
7. With the buttons [NEXT] and [PREV] on the player or [☐]
and [☐] on the remote control you can skip titles in forward
or backward direction:
•
Short actuation of the button [NEXT] or [☐]: skip to the
next title
•
Short actuation of the button [PREV] or [☐]: skip to the
previous title
8. For direct selection of a title with the numerical keys [0-9]
on the remote control, enter its number and confirm with the
button [PICK SONG].
Example: For title number 27 press keys [2], [7] and [PICK
SONG].
9. With the button [PRT/EQ] on the player or [ENTER] on the re-
mote control, you can activate random play and repeat functions.
•
First actuation: the titles are now played in random or-
der (indication "RANDOM")
•
Second actuation: continuous repeat of the selected title
(indication "SINGLE")
•
Third actuation: continuous repeat of all titles of the
data carrier (indication "ALL")
10. Long repeated actuation of the button [PRT/EQ] on the
player or short actuation of [EQ] on the remote control se-
lects an equalizer setting: "POP", "ROCK", "JAZZ" or "CLASSIC".
When set to "NORMAL", the frequency response is not affected.
11. To remove a USB device, discconect ir from the USB port.
To eject a memory card, slightly press it into slot until it comes
out and can be removed. Prior to removing a device, always
terminate the playback with the buttons [PLAY/PAUSE], [☐]
or [☐]. Otherwise damage or loss of data may occur.
12. Keep the button [STOP/POWER] pressed for two seconds
to switch off the audio player (indication "BYE BYE").
BAM 10A UHF
ENGLISH VERSION
Regarding Data Carriers
•
Folders will be combined for playback. There is no folder
navigation available.
•
If a data carrier is not recognized at the first try, remove
it and insert it again.
Setting up a Bluetooth Conection with
Mobile Devices
The built-in audio player features a Bluetooth receiver allow-
ing you to stream music wirelessly from your mobile devices
such as smartphones, tablets and notebooks.
1. Press the [MODE] button (repeatedly) on the audio play-
er or the remote control until the display indicates "BLUE-
TOOTH UNCONNECTED".
2. Activate the Bluetooth function on your mobile device and
keep ir at hand to pair it to the receiver. The Bluetooth receiv-
er is indicated by "Bluetooth" on the display of your mobile
device and has a range of approx. 10 meters.
3. Once the Bluetooth receiver is a connected to your mobile
device, the audio player's display indicates "BLUETOOTH
CONNECTED" and is ready to play music.
4. Press the [MODE] button (repeatedly) on the audio play-
er or the remote control until the display indicates "BLUE-
TOOTH". The devices will be paired. Just play music on your
mobile device as you normally would and the sound will
come out of the PA system.
5. When the display inserts "CONNECTED", the Bluetooth receiv-
er is connected to your mobile device and ir ready to play music.
6. To interrupt or continue the playback, press the button
[PLAY/PAUSE] on the player or [▶☐] on the remote control.
7. With the buttons [NEXT] and [PREV] on the player or [☐]
and [☐] on the remote control you can skip titles in forward
or backward direction.
8. To switch over to playback of a USB device or a memory
card press the button [MODE] (repeatedly).
p. 14
Tabla de contenido
