Maintenance; Cleaning The Filter; Fault Finding; Resolving Problems - Saivod Timer Dry Manual De Instrucciones

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

GB
In order to guarantee optimum drying results under all circumstances, remember that the filter must be cleaned
regularly. Remember to check and clean the filter after each drying cycle.
Important:
The filter must only be cleaned when the appliance is cold! Clean the filter following the procedure described below:
Open the door.
Grasp the filter in both hands
and push it upwards to remove
it.
Carefully widen the top edge and
open the filter.
Remove the woollen particles.
Close the filter, making sure that
All electric appliance may breakdown at some time. Remember to call a qualified electrician in these cases. However,
many problems can be resolved without the need for external intervention.
Important: If a fault occurs, disconnect the appliance from the mains supply immediately.
Before calling the customer service centre, check the points listed below.
If the drier doesn't start
Check that:
1) The appliance is plugged into
the mains supply.
2) The mains socket is working
correctly:
2a)The fuse has not blown.
(Check by plugging in
another appliance such as
a table lamp).
2b)All the instructions in the
manual have been followed.
The retailer can provide an accessory to enable the drier to be mounted on top of a front-loading washing
machine, thus saving space. The installer will inform you of the appliance model for which this option is
possible.
10

MAINTENANCE

CLEANING THE FILTER

the catch closes at the correct
position.
Clean the filter slide guides on
the appliance, using a vacuum
cleaner if necessary.
Reposition the filter in the slide
guides (fig. 13).

FAULT FINDING

RESOLVING PROBLEMS

If the drier doesn't start
Check that:
1) The door is closed properly.
2) The "START" button has been
pressed.
The washing does not dry
Check that:
1) The air exhaust tube is not
twisted or kinked.
2) The filter is not blocked.
(Remember that when the door
is opened, the internal parts of
the drier and the washing may
be very hot).

OPTIONAL ACCESSORIES

13
If, after all these checks have
been carried out, the appliance
still does not work, inform the
nearest customer service
centre.
When contacting the service
centre, inform them of the
appliance model, serial number
and type of fault.
This information will help the
service centre operator in
procuring the necessary spare
parts, thus guaranteeing a
speedy and efficient repair.
Tabla de contenido
loading

Tabla de contenido