Safety Instructions - HSM SECURIO P 44 Instrucciones De Servicio

Proper use, warranty
The shredder is designed exclusively for destroying
paper. Depending on the cutting type, small quanti-
ties of the following materials can also be shredded
in the paper cutting unit:
Shred width (mm)
Credit cards
CDs
Floppy discs
Its sturdy drive mechanism is not damaged by paper
clips and staples. Only on machines with safety
level HS Level 6 (1 x 5 mm) can the paper not con-
tain staples or paper clips.
Note: You can also shred CDs, diskettes and credit
cards in the separate CD cutting unit (optional) with-
out using the paper cutting unit.
The warranty period for the document shredder is
2 years. In addition, there is a life-long or 30-year
guarantee (depending on the legislation of the
individual country) on the solid steel blade rollers.
(except for security level HS Level 6). This warranty
and guarantee exclude wear and damage caused
by improper handling or actions taken by third par-
ties.

Safety instructions

• Read the operating instructions before switching
on the document shredder. Save these instruc-
tions for later use.
• Follow all warnings and instructions marked on
the product!
Risk of injury!
Do not reach into the paper feed slot.
Risk of injury from being pulled in!
Keep long hair, loose articles of cloth-
ing, ties, scarves, jewellery, etc. away
from feed opening. Material with the
tendency to form loops, e.g. tapes,
strapping material, etc. must not be
shredded.
Beware of injury when using the Beware of injury when using the
CD splitter CD splitter
Wear goggles when destroying CDs Wear goggles when destroying CDs
in machines without a separate CD in machines without a separate CD
cutting unit. cutting unit.
1004
5.8 3.9 3.9x50 1.9x15
● ● ● ●
● ● ● ●
● ● ●
Keep paper shredder out of the reach
of children. Do not let the shred-
der run if the person using it is not
present.
Switch the shredder off and discon-
nect it from the mains if it is dam-
aged, not working correctly or before
relocating or cleaning it.
Service work may only be carried out
by HSM Customer Service or by the
service technicians of our contractual
partners.
• Make sure the mains plug is easily accessible.
• Before plugging in the mains plug, check that the
voltage and frequency of your local mains supply
correspond to those stated on the type plate.
• This paper shredder should never be placed near
or over a radiator or heat source. The ventilation
slots must not be blocked or covered and they
must be at a distance of at least 5 cm away from
walls or furniture.
• Make sure no liquid is spilled on or in the paper
shredder.
Before starting up the machine for the fi rst time,
open the door and remove the three wing nuts of
the transport locks from the base plate under the
cutting unit.
9