Handling Batteries; Unpacking The Appliance; Overview Of The Components - Profi Care PC-HL 3086 Manual De Instrucciones

with inflammable adhesives or solvents (e.g. when gluing or paint-
ing parquet, PVC etc.).
• Do not insert any objects into the fan heater.
• Ensure that a safety distance is maintained between the power
cord and the housing.
• Do not use the fan heater in the open air.
• Do not use the fan heater in close proximity to bathtubs, showers
or swimming pools.
• The fan heater should not be placed directly below a mains power
socket.
• Do not repair the appliance by yourself. Always contact an au-
thorized technician. If the supply cord is damaged, it must be re-
placed by the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.

Handling Batteries

WARNING:
• Do not expose batteries to excessive heat such as
sunlight, fire or similar. There is a risk of explosion!
• Batteries are not toys. Keep away from children.
• Do not open batteries by force.
• Avoid contact with metal objects (rings, nails, screws,
etc.). There is a risk of short circuit!
• A short circuit could cause the battery to heat up ex-
cessively or even to catch fire, resulting in injuries.
• For your own safety, cover the battery terminals with
adhesive tape during transport.
• In case of battery leakage, make sure not to rub the
liquid into your eyes or mucous membranes. In case
of contact, wash your hands and rinse your eyes with
clear water. Seek medical attention if any discomfort
persists.
CAUTION:
Batteries can leak and lose battery acid. If the remote
control is not used for a long period of time, remove the
battery.
42
PC-HL3086_IM

Unpacking the Appliance

1. Remove the appliance from its packaging.
2. Remove all packaging material such as foils, padding,
cable holders and cardboard.
3. Fully unwind the cable.
NOTE:
There might be dust and production residue present on
the appliance. We recommend cleaning the appliance as
described under "Cleaning".

Overview of the Components

1 Air outlet openings
2 Ventilation grille
3 On / off switch ( I / O )
4 Safety switch
5 MODE ON / OFF button + indicator lamp
6 SWING button + indicator lamp
7 TIMER button + indicator lamp
8 TEM. button + indicator lamps Fan / Low / High
9 Display
ON / OFF button
10
UP button
11
SWING button
12
13 DOWN button
14 TIMER button
15 MODE button
18.06.20