Tabla de contenido
Idiomas disponibles
Idiomas disponibles
(Continued)
Adj ustments/Configurations
(alternatives)
Sets the mode to select the channel with Channel up/down button
(All/Favorite/Digital
only/Analog
only)
÷ Favorite: Only channels registered as FAVORITE (p, 20)
Selects the screen menu language (p, 16)
[Language
Adjusts the clock (p. 18)
[Clock
Sets channels (p. 50)
[ANT/Cable
setup
Selects the terminal and label of the external equipment (p. 53)
[Component
l/Component
2/HDMI I/HDMI 2/HDMI 3/Video 1Nideo 2]
To prevent howling, stops output of audio specified in this menu, (p. 53) (On/Off)
Prevents "Image retention" with Wobbling. (Automatic/Periodic)
÷ Automatic: Shifts the display image automatically.
[Pixel orbiter
_1
÷ Periodic:
Shiftsthe displayimageevery (1/2/3/4)minutesaccordinqto whatwas setinthe "Time(minutes)" menu.
Sets the time for "Pixel orbiter-Periodic" setting. (1121314)
Change the brightness of the side bar (Off/Dark/Mid/Bright)
(4:3 mode only)
[4:3 side
bars_i
÷ The recommended setting is "Bright" to prevent panel "Image retention". (p, 60)
Press "OK" to start "Scrolling" on the screen (p, 60)
[Scrolling
bar
]
Controls equipment connected to HDMI terminals (p. 40) (On/Off)
÷ "Power offlink", " Power onlink","Stand-by power s ave", "Auto power s tand-by" and"Default speakers" cannot beselected i f"Off"is
set.
[VIERA
Link
_i
Sets "Power on link" of HDMI connection equipment (p. 40) (Yes/No)
Sets "Power off link" of HDMI connection equipment (p, 40) (Yes/No)
Set "Stand-by power save" of HDMI connection equipment. (p, 40) (No/Yes)
Set "Auto power stand-by"
of HDMI connection
equipment.
(p, 40)
(NoNes
(with
reminder)/Yes
(no reminder)
Selects
the default speakers
(p, 40) (TV/Theater)
Sets Network
setting
(p. 44)
Sets VIERA CAST setting
(p. 46)
Network
setting
]
[VIERA
CAST setting
]
[Network
cameras
list
]
Set Network Camera status. (Search/Registration/Connection/Deleting/Default
setting etc,) (p, 30)
To conserve energy, the TV automatically turns off when NO SIGNAL and NO OPERATION is performed
for more than 10 minutes. (Enable/Disable)
Note
÷ Not in use when setting "Auto power on", "On/Off Timer", "Lock", "SD mode" or Digital channel,
÷ "No signal for 10 minutes was activated" will be displayed for about 10 seconds when the TV is turned
on for the first time after turning the power off by "No signal for 10 minutes".
÷ The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes prior to the shut-off,
To conserve energy, the TV automatically turns off when no operation of remote or side panel key
continues for more than 3 hours, (Enable/Disable)
Note
b activi,: f.or03 h ours
]
÷ Not in use when setting "Auto power on", "On/Off Timer" or PC input display,
÷ "No activity for 3 hours was activated" will be displayed for about 10 seconds when the TV is turned on .
for the first time after turning the power off by "No activity for 3 hours".
÷ The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes prior to the shut-off,
Turns TV On automatically when the cable box or a connected device is turned On. (No/Yes)
TV AC cord must be plugged into this device. TV comes on every time the power is
restored,
[Auto
power
en_]
÷ The "Sleep" timer, "On / Off timer", and "First time setup" will not function if "Auto power on" is set. (p. 54)
Set "Movie", "Thumbnail" or "Slideshow" to play back SD cards automatically.
(Slideshow/Thumbnail/Movie/Set
later/Off)
Displays
TV version
and software
license.
Performing
Reset will clear all items set with Setup,
such as channel
settings,
(p. 50)
About
]
[Reset
to defaults
]
@
,_'-F
_'_
-_r-
Adj ustments/Configurations
(alternatives)
Sets the mode to select the channel with Channel
up/down
button (All/Favorite/Digital
only/Analog
only)
Sets favorite
channels,
(p. 20)
Changes
the station
identifier.
(p. 51)
Checks
the signal strength
if interference
or freezing
occurs
on a digital image.
(p, 51)
37
Tabla de contenido
