Improper Use; Warning Signs; Identification Label; Main Components - Stiga 85 Combi QF Manual De Uso

3.1.2 Improper use

Any other use, different to the uses cited
above, may be dangerous and cause injury
and/or material damage. Improper uses (by
way of example and not limited to) are:
• carrying people, children or
animals on the machine;
• pushing loads;
• activation of the cutting devices
on grass-free areas.
Improper use will render the warranty
null and void and the Manufacturer shall
be exonerated from all liability, with all
responsibility for damages or injuries to self
or third parties being transferred to the user.
3.1.3 User types
This machine is designed for use by
the general public, i.e. non-professional
operators. It is intended for "hobby use".
IMPORTANT The machine must
be used by one operator.

3.2 WARNING SIGNS

There are various symbols on the machine
(fig. 3). They are designed to remind the
operator of the precautions which need
to be taken to safely use the machine.
What the symbols mean:
CAUTION!!! Read the instruction
manual before using the machine.
CAUTION!!! Watch out for any
loose objects on the ground. Pay
attention to any other people
who may be in the area.
WARNING! Before performing any
repair operations, disconnect the
spark plug lead from the spark plug.
CAUTION!!! Never put your hands
or feet under the safeguard when
the machine is in operation.
IMPORTANT Any damaged or illegible
decals must be replaced. Order replacement
decals from an authorised assistance centre.

3.3 IDENTIFICATION LABEL

The identification label holds
the following data (fig. 1):
1. Trade mark
2. Manufacturer's address
3. Model
4. Type of machine
5. Definition of the accessory
6. Weight in Kg
7. Year of manufacture
8. Serial number
9. Article code
10. CE conformity marking
Transcribe the machine identification
data in the space provided on the
label found in the back cover.
IMPORTANT Use the identification
data written on the product identification
label whenever you contact an
authorized service centre.
IMPORTANT The example of the
declaration of conformity can be found
on the last pages of this manual.

3.4 MAIN COMPONENTS

The machine is made up of the
following main components (fig. 1):
A. Arms
B. Safeguard
C. Wheels
D. Grip point for manual lifting
E. "Quick Flip" knob
F. Cutting means drive belt
G. Cutting height indicator
H. Manual cutting height adjustment (if present)
I. Electric cable connector (if present)
J. Cutting means
Components instalaled on the ride-
on lawnmower with front cutting
K. Quick-release supports
L. Lifting pulley
M. Accessory lift pedal
N. Cutting height electric adjustment switch
O. Power socket (if present)
EN - 4