Symbol CRD 1700-1000S Manual De Instrucciones página 8

C R D
Charging the SPT 1700 Battery
The cradle may also be used to charge the SPT 1700 lithium-ion
battery. To charge the terminal’s battery:
1. Ensure the cradle is powered on.
2. Insert the terminal in the cradle.
Terminal Charge
The Terminal Charge LED turns red to indicate charging. The
terminal’s battery is fully charged after approximately two hours.
The Terminal Charge LED turns green when the battery is fully
charged.
Note: If the battery in the terminal is low, the Terminal Charge
LED may flicker or turn yellow during a HotSync
operation. The LED returns to red when the operation
is complete.
Spare Battery Charging
You may also use the cradle to charge the terminal’s spare battery.
To charge the terminal’s spare battery, insert the battery in the spare
battery charging slot in the back of the cradle, and gently press
down on the battery to ensure proper contact. The battery should
be oriented so that the charging contacts are facing down and
toward the back of the cradle. The Spare Battery Charge LED turns
1 7 0 0 - 1 0 0 0 S
C r a d l e
LED
8