Idiomas disponibles
Idiomas disponibles
Energy Tech
SENSOR
118
ENERGY TECH 10W
BEFORE INSTALLING THIS PRODUCT, PLEASE READ THE INS-
TRUCTIONS CAREFULLY AND STORE THEM IN A SAFE PLACE.
THE INSTALLATION SHOULD BE CARRIED OUT BY TRAINED
STAFF.
THE WARRANTY COVERS ONLY AND EXCLUSIVELY THE
PRODUCT SUPPLIED.
FAILURES CAUSED BY INSTALLATIONS OUTSIDE OF WHAT
THE REBT 2002 INDICATES, EXEMPT THE VALIDITY OF THE
WARRANTY ON DAMAGED PRODUCTS.
IT IS OF OBLIGED COMPLIANCE WITH INTERIOR INSTALLA-
TIONS THE APPLICATION OF ARTICLE 16, POINT 3 OF THE
REBT 2002.
OBSERVE
PRECAUTIONS
ELECTROSTATIC SENSITIVE DEVICES.
PRECAUTIONS:
• This product is for outdoor use.
• Do not handle the product while it is in operation. When handling, switch
off the power supply.
• Do not immerse this product in water or handle it with wet hands.
• If the product is damaged, replace it with a new one.
• In the event of breakage or damage to the protective glass, it must be
replaced immediately.
• Do not touch the body of the protector when it is hot.
• Carefully follow the instructions in this manual.
• If in doubt, consult a qualified technician.
ASSEMBLY INSTRUCTIONS:
1. Turn off the power.
2. Remove the bracket from the luminaire.
3. Attach the bracket to the mounting surface with the appropriate screws
taking into account that the object to be illuminated must be at least one
meter away from the projector.
4. Attach the luminaire to the bracket with its accessories.
5. Connect the line (L), neutral (N) and ground cables (
the power cord.
6. Adjust the position of the luminaire and tighten the screws.
7. Turn on the power.
SENSOR SPECIFICATIONS:
• Detection range: 120º~180º
• Detection distance: 8~2m (if the temperature is less than 24ºC)
• Delay time: 5sec~12min
1/3
agosto 2020
35
18
WARNING
ATTENTION!!!
FOR
HANDLING
149
42
20
ENERGY TECH 20W
Voltage
Electrical isolation
Degree of waterlightness
• Installation height: 2~2,5m
OPERATION SENSOR CONTROLS:
• TIME: It regulates the period of time that the focus keeps the illumination in
a range from 5sec to 12min.
•
• LUX: Adjusts the sensitivity to the natural light threshold of the environment.
•
• SENS: Adjusts the activation distance from the object/person in motion. The
maximum distance of the sensor is 12m at a temperature of 24°C, if the
temperature is higher, the distance will be reduced.
) correctly to
SENS
172
ENERGY TECH 40W
ELECTRICAL CHARACTERISTICS
DEGREE OF PROTECTION
TIME
45
22
200-240V ac
IP65
LUX
