Tabla de contenido
Electric Overblanket Use instructions
It is not advisable to use extension cords, as these may overheat and cause the risk of fire. Do not
use a single extension cord to operate more than one electric overblanket.
Do not touch the plug or electric overblanket with wet hands.
Avoid using the electric overblanket in dusty environments or in the presence of flammable vapours
(e.g. in workshops or garages).
Do not place the electric overblanket above or near another heat source.
An electric overblanket contains parts that generate arcs or sparks. Do not use the underblanket
in potentially dangerous areas such as areas at risk of fire or explosion, or environments filled with
chemical substances or humidity.
This electric blanket must be used over the bed (not between the mattress and bedsheet) or as a
shawl, over the user.
The control must be within the user's reach, free, on top of the blanket itself, for ease of use without
impeding the user's movements, and never underneath the user.
Place the power cord far away from busy areas or places where it can be accidentally pulled-out.
This electric overblanket cannot be used in bathrooms, laundry rooms, next to a shower or swim-
ming pool or in similar indoor environments. Never position the electric overblanket where it may fall
into a bath or other containers filled with water.
Do not allow the power cord to touch the hot parts when the electric overblanket is in operation, in
order to prevent the heat from damaging the cord.
The cord must be kept far away from heated surfaces.
Do not operate the electric overblanket outdoors. Do not operate the electric overblanket next to an
open window.
WARNING: do not operate the electric overblanket with an programmer or any external other
device different from its control (KDA6-FT) that automatically turns on the overblanket, as
this may cause the risk of fire.
Do not attempt to repair, dismantle or modify the electric overblanket. The overblanket does not
contain parts that can be repaired by the user.
Turn the switch off and remove the plug before carrying out any maintenance work or moving the
electric overblanket.
Always remove the plug from the socket when the electric overblanket is not in use.
WARNING: ALWAYS REMOVE THE PLUG WHEN CARRYING OUT MAINTENANCE WORK OR
MOVING THE ELECTRIC OVERBLANKET.
If the electric overblanket is not used for prolonged periods, remove the plug, replace the overblan-
ket in its box and store it in a dry, ventilated place.
WARNING:
THE ON/OFF SWITCH IS NOT THE ONLY METHOD OF DISCONNECTING THE MAINS POWER.
ALWAYS PULL OUT THE PLUG FROM THE SOCKET IN THE EVENT OF MAINTENANCE OPE-
RATIONS, WHEN MOVING THE ELECTRIC OVERBLANKET OR WHEN IT IS NOT USED.
Consult a doctor before using the electric overblanket when in doubt as to its possible effects on
health.
In the event of prolonged pain affecting the muscles or joints, interrupt use and consult a doctor.
12
Tabla de contenido
