Care Recommendations; C O N D En Ser C Lean I N G; Condenser (Behind Grille) - Subzero PRO REFRIGERATION Guía De Uso Y Cuidado

C A R E RE C O MM E NDAT I O N S
Cleaning
IN T E R I O R C LE A N I NG
To clean interior surfaces and all removable parts, wash with
a mild solution of soap, water, and baking soda. Rinse and
dry thoroughly. Avoid getting water on the lights.
CAUTION
Do not use vinegar, rubbing alcohol, or other alcohol-
based cleaners on any interior surface.
STA INL E S S S T E E L E X T E RI O R
Use a nonabrasive stainless steel cleaner and apply with
a soft lint-free cloth. To bring out the natural luster, lightly
wipe the surface with a water-dampened microfiber cloth
followed by a dry polishing chamois. Always follow the grain
of stainless steel.

C O N D EN SER C LEAN I N G

CAUTION
Before cleaning the condenser, turn power off to the unit.
Wear gloves to avoid injury from sharp condenser fins.
The condenser is located behind the grille. To access, rotate
the bottom of the grille upward. Use a soft bristle brush and
vacuum to remove dust and lint from the condenser. Clean
the condenser every 6–12 months. Refer to the illustration
below.
To avoid damaging the condenser fins,
IMPORTANT NOTE:
vacuum in the direction of the fins.
CAUTION
Failure to clean the condenser could result in tempera-
ture loss, mechanical failure, or damage.
VAC ATIO N S
For extended vacations, turn the unit off. Empty the unit and
block doors open to let fresh air in and keep the interior dry.
The water filter should be replaced before start up.
CONDENSER
Condenser location
subzero.com | 11