LaserLiner MasterCross-Laser 2 Manual De Instrucciones página 9

MasterCross-Laser 2 / MasterCross-Laser 2G
1
1 Laser emitting window
2 Slide switch
a ON
b Slope mode
c OFF / Transport lock
3 Battery compartment
(bottom)
Horizontal and vertical levelling
2
Release the transport restraint, set slide switch (2) to "ON". The laser cross will appear.
The laser lines can be switched individually with the selection button.
LASER LASER
The transport restraint must be released for horizontal and vertical levelling. The LED shows
!
a permanent green light. The laser lines flash and the LED lights red as soon as the device is outside
the automatic levelling range of 3°. Position the device such that it is within the levelling range.
The LED switches back to green and the laser lines stop flashing (steady light).
a b c
3
4
5
4 5/8" tripod threads
(bottom)
5 1/4" tripod threads
(bottom)
6
Hand receiver mode
7 LED Hand receiver mode
LASER LASER
8
7
6
2
When transporting always
!
switch off all lasers, secure
the pendulum and set the
slide switch to "OFF"!
8 LED levelling
red: levelling off
green: levelling on
9 LED Status indicator
10
Laser line selection button
9
10
09
GB