How To Use; Troubleshooting - Blaupunkt BP-GIKLED11 Manual Del Usuario

BP-GIKLED11
5. Operation
5.1. Introduction
This insect killer uses an LED to attract flying insects. The fan will suck these insects into the container and dry
them. This insect killer does not produce any noisy electric shocks nor does it emit any toxins, smoke, scent or
radiation.
This insect killer is designed to be used indoors (bedroom, living room).
Keep the insect killer working for more than 48 hours at first use. Do not open the container during use. Make
sure the insects are dried to death to prevent them from escaping.
Keep the insect killer working for 3 hours before going to sleep. Make sure to keep windows and doors closed.

5.2. How to Use

1. Connect the insect killer to the power source. Install the insect killer in a dry location on a stable and non-
slippery surface.
2. Press the on-off button to switch on the appliance.
3. Press AUTO to switch on the automatic mode. The appliance will automatically switch on or off according to
the daylight condition.
4. Press the timer button to set the timer.
5 h à 8 h à 12 h à timer off à 5 h
5. Adjust the brightness of the LED with the light intensity button.
6. Press the on-off button to switch off the insect killer. Disconnect from the power supply after use.
Choose either the auto or timer mode as you cannot use them simultaneously.
For best results, turn off other light sources and prevent from installing the appliance in the draught.

6. Troubleshooting

Appliance does not start
BP-GIKLED11.indd 4
Problem
Power supply not connected well
On-off button not pressed
4
Reason
Reconnect the power supply
Press the on-off button
Possible solution
11/12/2018 13:25:52