3. Press the "AMP" button to choose the desired charging rate (2A, 8A, 15A
or Auto) – if unsure select the automatic charging rate. Press the "BATTERY
TYPE" button to select battery type (standard, AGM, Gel or Lithium
(LiFePO4)) – then press the "CHARGE" button to start charging. The LCD
screen will display the settings. See example in Figure C.
Note: If user does not select the charging amp and battery type settings within 30
seconds, Charger will start charging the battery using the default setting – automatic
charging rate for standard battery.
4. Once the battery is fully charged the Charger automatically switches to a
float charge/maintenance mode.
5. For weak/sulfated batteries or batteries that have been unused for long
periods of time, the battery reconditioning function may be used to recover
the battery from deep discharge and help the battery last longer. Press
the "RECONDITION" button to activate this function. The LCD screen will
display as shown in Figure D.
Wagan Tech and wagan.com are trademarks of Wagan Corporation.
User's Manual—Read before using this equipment
Figure C
Figure D
©2020 Wagan Corporation. All Rights Reserved.
8