Fault Codes - Wagan Tech 15A Intelligent Manual De Usuario

15A Intelligent Battery Charger by Wagan Tech

FAULT CODES

Fault Code
11
Cause
Clamps connected to wrong
terminals on battery.
The Charger is
overheating.
Charger may be connected to
24 V battery.
1. An appliance is drawing
power from battery
being charged.
2. Selected charging rate
is too low for battery
rating.
Defective battery, will not hold
full charge.
www.wagan.com
®
Solution
Correct clamp connections on
battery.
Make sure air vents on
Charger are clear. Charger
will automatically resume
charging when it has cooled
down.
Verify battery being charged
is 12 V.
1. Disconnect the
appliance and charge
battery again.
2. Select higher charging
rate and continue
charging battery.
Have battery checked by a
qualified technician. Replace
battery if necessary