BP-GIKLED08
•
Remove all flammable materials close to the device before switching on.
•
Do not install the device on a flammable surface (linoleum, carpet, wood, paper,
cardboard, plastic, etc.).
•
Protect this device from heat sources such as radiators, heat registers, stoves, or
other appliances (including amplifiers) that produce heat.
•
Do not remove the cover under any conditions. There are no user-serviceable
parts inside. Never operate this device when its cover is removed.
•
Do not operate a visibly damaged device. Do not attempt to operate this device
if the power cord has been frayed or broken.
•
Always mount this device in a safe and stable manner. Mount this device in an
area that will allow proper ventilation. Allow about 15 cm between this device
and a wall.
•
This device should only be serviced by qualified service personnel.
•
Familiarise yourself with the functions of the device before actually using it.
•
Always install the device in a well-ventilated location.
•
Keep this device away from dust and extreme temperatures. Make sure the venti-
lation openings are clear at all times. For sufficient air circulation, leave at least
2.5 cm in front of the openings.
•
Never carry or move the device from the power cord or any other moving part.
Always use the bracket.
•
In the event of an operating problem, stop using the device immediately.
•
Never try to repair the device. There are no user-serviceable parts inside the
device. Refer to an authorized dealer for service and/or spare parts.
•
This device is not designed for permanent operation: regular operation breaks
will prolong its live.
Warnings Regarding Servicing
No user-serviceable parts inside. The light source in this appliance cannot be
replaced. Scrap the appliance when the lamps cease to operate.
•
Disconnect from the power supply before servicing, cleaning and opening.
•
Keep this appliance away from children and unauthorized users.
•
The appliance is not to be used in locations where flammable vapour or explo-
sive dust is likely to exist.
3. General Guidelines
•
All modifications of the device are forbidden for safety reasons. Damage caused
by user modifications to the device is not covered by the warranty.
•
Only use the device for its intended purpose. Using the device in an unauthor-
ised way will void the warranty.
4