Front View - TECshow BUBBLE MASTER 2 Manual De Usuario

Setup
Install the sleeve to the front of the bubbler, using the 4 pro-
vided screws.
Fill / Replace Bubble Fluid
1. Place the B ubble Master II on a level surface and loosen the
4 thumb screws on either side of the unit for fluid tank access.
2. Once removed, lift the cover.
3. Fill the tank with bubble fluid.
DO NOT FILL PAST TOP OF FLUID RESERVOIR.
4. Lower the cover and tighten thumb screws.
Operation
1. Plug into a suitable wall outlet.
2. Turn on the Bubble Master II.
Note: Do not leave unused fluid in the reservoir for an extend-
ed period. The fluid may thicken in the reservoir. Remove all
fluid before packing or shipping.

Front view

BUBBLE MASTER 2
ENGLISH VERSION
p. 4