Picture Setup - Sunstech TLI1985HD Manual De Instrucciones

PICTURE SETUP

1. Press the TV-MENU button on the remote
controller to display the OSD main menu.
2. Press t
/u button to select the PICTURE menu.
3. Press p
/q button to select each item.
4. Press the TV-MENU or EXIT button to exit from the menu.
Picture Mode:
Select a desired picture mode among Dynamic, Standard,Mild and User.Dynamic, Standard and
Mild are the factory preset picture mode and the parameter of those modes can not be changed. If
you want to adjust any items (e.g. Contrast, Brightness ,Clour and sharpness etc), please select
User, and the settings will be stored in User mode.
C
You may select the picture mode directly by pressing the PMODE button on the remote control.
Contrast:
Adjust the color brightness of the image.
Brightness:
Adjust the darkness and lightness of the image.
Color:
Adjust the saturation level of color.
Sharpness:
Adjust the sharpness level of image.
Tint:
Adjust the tone of color when your system is in NTSC.
Color Temperature
Red
Green
Blue
Aspect Ratio
Noise Reduction
EXIT Quit MENU
USING THE MENUS
PICTURE
User
50
50
50
16:9
On
ENTER
Back Select
Color Temperature:
Select a optimum color temperature level(Cool/
Standard/Warm) or customize by selecting User.
The level of Red, Green and Blue are can be
adjusted separately in user mode.
Aspect Ratio:
Select a display mode.
Noise Reduction:
If the broadcast signal received is weak, you can select
this function to reduce the video noise if the option set
the "On".
15
PICTURE
Picture Mode
Standard
Contrast
Brightness
Color
Sharpness
Tint
EXIT Quit MENU ENTER
Back
50
50
50
50
0
Select