Tabla de contenido
Idiomas disponibles
Idiomas disponibles
EN
1. Attach each of the power cord storage arms (9) into the
two separate positions on the lower handle of the fixture.
2. Align the screw (13) with the holes in each of the two
power cord storage arms (9).
3. Push the screw (13) through and tighten both power cord
storage arms (9) with a Phillips head screw driver (not
included).
3.6
INSTALL THE UPPER HANDLE
15
1. Align the holes on the upper handle (23) and the lower
handle (24).
2. Insert the handle bolts (25) and use the handle knobs (15)
to tighten them.
3.7
INSTALL THE SPRAY WAND
1. Push the end of the spray wand (4) into the trigger handle
(1) and rotate clockwise to secure.
2. Pull on the spray wand (4) to be certain it is properly
secured.
Make sure that the connection has no leakage.
23
25
24
4
1
WARNING
English
3.8
INSTALL THE HIGH PRESSURE
HOSE
16
1. Push and turn clockwise one end of the high pressure
hose (11) into the inlet coupler (8).
2. Install and tighten the other end of the high pressure hose
onto the water outlet (16) coupler.
4
OPERATION
15
Make sure that all the connections are tight and have no
leakage before operation.
4.1
CONNECT THE WATER SUPPLY
TO THE MACHINE
For easy operation, please use a self-coiling garden hose (not
provided).
When you operate the self-coiling hose, make sure that the
hose has no blockage.
•
The water supply must come from the water main
•
Do not use hot water
•
Do not use water from ponds or lakes
Always observe all the local regulations when you connect
the garden hose to the water supply. Direct connection
through a receiver tank or backflow preventer is usually
permitted.
8
11
WARNING
WARNING
WARNING
WARNING
8
Tabla de contenido
