Possible Problems And Solutions - Lacor 69308 Instrucciones De Uso

POSSIBLE PROBLEMS AND SOLUTIONS

Problem
The appliance The appliance is not
doesn't work plugged in or the power cord connector
is not connected to the appliance
You have not set the timer
The ingredients Too much ingredient
are not done
The preparation time is not enough
The set temperature is too low
The ingredients The ingredients are not placed
are fried unevenly evenly in the pan
The ingredients are The ingredients are piled too high in the
burned pan, too close to the halogen heater
The baking time is too long
The set temperature is too high
The stir is not working The stirring gear is not placed properly
in the appliance and doesn't clutch with
the driving gear
The stir is blocked because the cube of
ingredients is too big and too long
Too much ingredient
The steam cover the The ingredients contain too much water
glass cover and too or the ingredients are frozen
much water in the pan
Possible cause Solution
Plug the main plug in wall socket and
connect the power cord connector to
the appliance
Turn the timer to the required preparation
time to switch on the appliance
Put smaller batches of ingredient in the
pan
Increase baking time
Set the temperature icon to requirement
of table 1
Placed the ingredients
evenly in the pan
Spread the ingredients in the pan,keep
them at a distance to the halogen heater
Shorten the baking time
Refer table 1 to set the temperature icon
Place the stirring gear properly in the
appliance to clutch with the driving gear
Reduce the cube of ingredients
Put smaller batches of ingredient in the
Pan
Take the pan out and drain the water
39