Trouble Shooting - Universal Power Group 20VBA2-25.1 Manual De Instrucciones

FR

6. TROUBLE SHOOTING

ES
PT
IT
Four red lights
flickered on and
EL
off during the
operation
PL
RU
KZ
UA
Four red lights
on
RO
seconds during
the operation
BR
EN
Four red lights
flashed in turn
during
operation
When pressing
the
button or in the
operation, four
lights not on
240
Over-current
protection
Short circuit /
for ten
Fuse broken
Temperature
out of working
range
the
Battery pack
light
broken
Release the switch of the tool, wait
for 3 seconds and restart. If the four
LED are the same, stop the tool,
remove the battery pack from the
tool, wait for 60 seconds to charge,
put on charge during at least 5 min.
After charging, re insert the battery
pack to the tool and restart.
If the four LED are the same, stop the
tool, remove the battery pack from
the tool and contact an authorized
service center.
Stop the tool, remove the battery
pack from the tool, wait for
60 seconds to charge, put on
charge during at least 5 min. After
charging, reinsert the battery pack
to the tool and restart. If the four
LED are still the same, stop the
tool, remove the battery pack from
the tool and contact an authorized
service center.
Stop the tool, remove the battery
pack from the tool, wait for
15 minutes to cool.
Contact an authorized service center