Operation - Universal Power Group 20VBA2-25.1 Manual De Instrucciones

4. OPERATION

Note: Before using your battery pack be sure to read the
instruction manual carefully.
This battery pack has been shipped completely assembled.
Carefully remove the battery pack from the box.
WHEN TO CHARGE THE BATTERY PACK
Battery packs are shipped in a low charge condition to prevent
possible problems. Therefore, you should charge prior to first use.
If the charger does not charge the battery pack under normal
circumstances, return both the battery pack and charger to your
nearest Authorized Service Center for electrical check.
The Lithium-Ion battery pack can be charged at any time and
will not develop a "memory"when charged after only a partial
discharge. It is not necessary to turn down the battery pack charge
before recharging. Remove the battery pack from the tool when it
is convenient for you and your job.
You can recharge your battery pack's charge before starting a big
job or a long period of use.
Due to Lithium-Ion' s fade-free properties, the only time it is necessary
to charge the Lithium-Ion battery pack is when the pack has
reached the end of its charge. To signal the end of charge, power
to the tool will drop quickly. Charge the battery pack as needed.
HOW TO CHARGE THE BATTERY PACK
Note: This Lithium-Ion battery pack is shipped partially charged.
Fully charge the battery pack before using it for the first time.
Charge the Lithium-Ion battery pack only with the correct
charger. Align the raised ribs of the battery pack with the slot in
the charger. Insert the battery pack into the charger.
Connect the charger to a power supply.
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
BR
EN
235