Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Pyro Next
| Folding wheelchair
7. Transport
7.1. Transport the wheelchair
To transport the wheelchair as convenient as possible, all detachable
parts (footrests, wheels, accessories) must be removed and the wheelchair
folded.
7.2. Seat in disabled vehicle
A
You can determine whether or not your wheelchair is approved for use
Wheelchair suitable for
use as a seat in a vehicle
as a seat in a vehicle for transporting disabled people by referring to
for transporting disabled
the symbols on the CE sticker on the product:
people.
All products approved by B+B for use as seats in vehicles are tested
in accordance with ISO 7176-19. The tests in accordance with ISO
7176-19 were performed using restraint systems from AMF-Bruns. The
correct mounting of the restraint system is a prerequisite for the safe
transportation of the products in a vehicle for transporting disabled
people and the basis for the approval.
The restraint systems from AMF-Bruns provide the ideal points for the
provision of restraint force for the purpose of securing the products in
B
the vehicle for transporting disabled people (known by the German
term „Kraftknoten", which is defined in the standard DIN 75078-2).
Wheelchair not suitable
For the purpose of providing restraint in the vehicle for transporting
for use as a seat in a
disabled people (fig. C), the products must only be secured at these
vehicle for transporting
disabled people
specific points („Kraftknoten" points). If possible, use a permanently
installed car seat and its belt system. Stow the wheelchair in the
luggage space. The person responsible for the transportation should be
familiar with the current regulations for transportation as well as with
the method of operating the vehicle for transporting disabled people
and the restraint system.
Anchored 4-point restraint systems must be used to secure the
wheelchair in the vehicle.If you have any queries about securing your
product in a vehicle for transporting disabled people, please contact
C
the B+B customer service department on +49 (0)700/60007070.
Fixation points on the
restraint system
56
Folding wheelchair |
8. Maintenance tips for users
8.1. Cleaning and disinfection
•
The frame and the paneling of the wheelchair can be cleaned with
a moist cloth. You can use a mild detergent for more stubborn dir
•
The wheels can be cleaned with a wet synthetic fiber brush (do not
use a wire brush!)
•
Push handles, arm pads, and seat and back pads can be washed
off. Use mild detergent.
•
To disinfect the chair, add a commercially available disinfectant,
which reliably kills bacteria and germs, to washing water
A list of the disinfectants approved by the Robert
Koch Institute can be found at www.rki.de
8.2. Inspection of the wheelchair
by the user
8.2.1. Brake Inspection
Make sure your brakes are operating properly before each use.
It should not be possible to push the wheelchair away while the
brakes are activated.
The wheelchair should be easy to drive without grinding noises and
with good direction stability when the brakes are released.
If you notice unusual behaviour when braking, inform your
qualified mobility dealer immediately and do not use the
wheelchair.
Bischoff & Bischoff GmbH | 01.06.2019
Pyro Next
57
Capítulos
Tabla de contenido
