Tabla de contenido
Idiomas disponibles
Idiomas disponibles
VERY IMPORTANT:
Be careful when changing new blades in place of new. Due to the way the blades wear, the old
blades become very sharp, like a knife as a safety precaution wear heavy duty gloves during this
operation to prevent the hands being cut.
Remove bolts and lock washers on each trowel arm and remove the blades. Before installing new
blades clean all concrete/cement from bottom and side of the trowel, be sure trowelling edge of the
blade is behind trowel arm. Install bolts and lock washers on each trowel arm and fasten securely.
*For engine maintenance refer to the engine manual
1.8
Instructions for Ordering Spare Parts
Spare parts are on sale thrugh the official services and in the brand distributors in your locality.
When you order spares do not forget to indicate:
Type of machine
-
Units ordered, code and description of parts requested , and whenever possible, the series
-
number of the machines
When equipment or spare parts have to be returned to the factory its necessary to contact with
-
Industrias Technoflex S.A. for prior agreement, "AN ABSOLUTE NECESSITY FOR THEIR
RECEPTION".
1.9
Transport and Storage
•
Conditions for transport and storage:
The packaging of this Vibrating-Surfaces Strip allows its easy transport without taking any special
precaution.
Its storage this machines if it is for a long period of time, its storage will be in a safe dry place.
Before storage and after use the machine must be perfectly cleaned, taking all the concrete leftovers
off, this operation can be carried out by hydro jet avoiding the electric parts.
Remember that for reasons of security in the transport, the crankcase of the motor and the
tank of fuel leave factory WITHOUT OIL AND WITHOUT FUEL.
INGLÉS
OPERATION
1B
1B-7
Tabla de contenido
