Adjusting The Presser Foot Lift; Adjusting The Micro-Lifter - JUKI MF-7200D Manual De Instrucciones

16. Adjusting the presser foot lift
WARNING :
To protect against possible personal injury due to abrupt start of the machine, be sure to start the fol-
lowing work after turning the power off and ascertaining that the motor is at rest.
4
5
3
17. Adjusting the micro-lifter
WARNING :
To protect against possible personal injury due to abrupt start of the machine, be sure to start the fol-
lowing work after turning the power off and ascertaining that the motor is at rest.
1
3
1) To adjust the heght of the presser foot, adjust the
2) Adjust the poston of the thrust collar so that the
1
2
0.1 mm
When mcro-lfter knob 1 s turned counterclockwse,
mcro-lfter stopper 2 lowers and comes n contact wth
presser lftng lever 3 . Then the presser foot goes up.
Adjust the heght n accordance wth the sewng
2
condtons.
– 21 –
heght of screw 1 so that the presser foot does not
come in contact with other components and fix the
presser foot wth nut 2 .
clearance between thrust collar 3 and presser bar
bushng 4 s 0.1 mm when the presser foot s lfted.
Then fix the thrust collar with setscrew 5 .
When the micro-lifter is not used, turn
clockwise micro-lifter knob 1 and fix micro-
lifter stopper 2 at the highest position.