Writing With Emag 70; Opening The Writing Stand; Hardware Components; Power Button - Schweizer eMag 70 Manual De Instrucciones

Writing with eMag 70

You can also use eMag 70 to sign checks and other documents, complete forms, write notes, and more.
A writing stand is incorporated in eMag 70. It elevates part of the unit, leaving enough space for your fi ngers
and a pen, pencil, or other small tool. As you write or work, you can see what you are doing on the unit's
screen.

Opening the Writing Stand

To use the writing stand, do the following:
1. Make sure that eMag 70 is open as previously described in Opening eMag 70 on page 37.
2. Place your thumb in the small recessed area on either side of the unit, and lift the top section, with the
LCD screen, until it snaps into position as shown in the following illustrations.
44

Hardware Components

Use the illustrations and item numbers to identify eMag 70 parts.
Place item below
the camera window

1 Power Button

Press the green Power button
on. To turn the unit off, press and hold the green
Power button
2 Power Connector
Plug in the supplied power cable adapter into the
small, circular port on the left side of eMag 70.
Only connect the supplied power adapter to this
port. For information about charging the battery,
see page 35.
Left side of eMag 70 3 Battery Indicator LED
The battery indicator LED is located next to the
power connector on the left side of the unit.
When the battery is low, the LED blinks red
and the battery icon is shown in the upper right
corner of the LCD screen. When the battery is
charging, the LED blinks green. The LED stops
blinking when the battery is fully charged. When
you unplug the unit from the power adapter, the
LED turns off. For more about LED operation,
refer to LED Descriptions on page 36.
(Green)
to turn the unit
for approximately two seconds.
45