Setting The Password - Orbis ANRET M-MULTI Manual De Uso

SETTING THE PASSWORD

It is possible to enter a 4-digit password to protect the access to the programming
function
L1
k
M
V
L2
A Sys
W
L3
PF
Wh
OK
k M
varh Prg
Hold down keys"
varh Prg
measurement page
The message "InSErt nEW CodE" will scroll through the screen
To set the value of the flashing digit, use the "
press" "to go to the next digit
varh Prg
Press " " to memorise the password entered and return to the display
Wh OK
of the main menu
If a password is already entered in the instrument and you want to change it, the
message
"InSErt Old CodE" will appear before you enter the new password, and you will
have to enter the old password
If the password entered is incorrect, the message "Error" will appear and the
instrument will return to the display of he main menu. Otherwise, the user will be
asked to enter the new password
Note: the password set by default is "0000", which means that the
access to the programming function is not protected.
The default password can be reset by switching off the power supply
or resetting the instrument.
L1
L2
L3
k M
"and " " for approximately 3 seconds from the
PF
- 42 -
User's Manual - ANRET M-MULTI / Q-MULTI
L1
k
M
V
L2
A Sys
W
L3
PF
Wh
OK
k
varh Prg
" or " "keys, then
W PF
k
M
V
A Sys
W
PF
Wh
OK
M
varh Prg