Cleaning And Maintenance; Technical Specifications - HQ-Power VDPL110CC Manual Del Usuario

Channel function
CH1 dimmer
CH2 dimmer
CH3 dimmer
colour
CH4
macros
speed
CH5
strobe
CH6 mode
CH7 dimmer

8. Cleaning and maintenance

• All screws should be tight and free of corrosion.
• The housing, the lenses, the mounting supports and the installation location (e.g. ceiling, suspension,
trussing) should not be deformed, modified or tampered with e.g. do not drill extra holes in mounting
supports, do not change the location of the connections ...
• Mechanically moving parts must not show any signs of wear and tear.
• The electric power supply cables must not show any damage. Have a qualified technician maintain
the device.
• Regularly remove dust from the housing and the air vents using a slightly damp cloth.
• There are no user-serviceable parts inside. Refer to an authorized dealer for service and/or spare
parts.

9. Technical specifications

power supply
power consumption
light source
dimensions
total weight
Use this device with original accessories only. Velleman nv cannot be held responsible in the
event of damage or injury resulted from (incorrect) use of this device. The information in this
manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved.
No part of this manual or may be copied, reproduced, translated or reduced to any electronic medium or
otherwise without the prior written consent of the copyright holder.
17.01.2011
DMX-512
value
000 ~ 255 0% ~ 100%
000 ~ 255 0% ~ 100%
000 ~ 255 0% ~ 100%
000 ~ 015 no function
colour macros (overrides CH1, CH2, CH3 setting)
016 ~ 255
000 ~255 slow ~fast (when CH6 = 32 ~ 223)
000 ~ 015 no function
016 ~ 255 slow ~fast (when CH4 = 016 ~ 255 or CH1, CH2, CH3 <> 000)
000 ~ 031 RGB mode (CH1, CH2, CH3)
032 ~ 063 pulse 0 ~ 100% (CH1, CH2, CH3)
064 ~ 095 pulse 100 ~ 0% (CH1, CH2, CH3)
096 ~ 127 pulse 100 ~ 0 ~ 100% (CH1, CH2, CH3)
128 ~ 159 auto fade transition
auto snap transition – 3 colours
160 ~ 191
192 ~ 223 auto snap transition – 7 colours
224 ~ 255 sound triggering mode
000 ~ 255 0% ~ 100% (when CH4 = 016 ~ 255 or CH1, CH2, CH3 <> 000)
240VAC ~ 50HZ
11W
1x high-power 10W LED, tri-colour
260 x 100 x 100mm
1.0kg
VDPL110CC
Control Programs
red
green
blue
6
Rev. 01
speed controlled by
CH5
©Velleman nv