Before Initial Use - Beem MILK-SWIRL Manual De Instrucciones

17
• In the interest of your own safety, inspect the device and the connecting cable for damage
each time before you use it. Use the device only if it is in working order.
• Make sure that the connecting cable does not present a trip hazard. The connecting cable
should not hang down from the surface on which the device is placed in order to prevent
the device from being pulled down.
WARNING – Danger of Fire
• Do not use the device in rooms containing easily ignitable dust or poisonous and explosive
fumes.
• Do not connect the device along with other consumers (with a high wattage) to a multiple
socket in order to prevent overloading and a possible short circuit (fi re).
• Do not operate the device in the vicinity of combustible materials. Do not place any com-
bustible materials (e. g. cardboard, paper, wood or plastic) in or on the device.
• Do not cover the device during operation.
NOTICE – Risk of Damage to Material and Property
• Only use suitable extension cables whose technical data is the same as that of the device.
• Switch off the device and pull the mains plug out of the plug socket if an error occurs during
operation or before a thunderstorm.
• Never pull or carry the base station by the connecting cable. When you pull it out of the
plug socket, always pull on the mains plug and never the mains cable!
• Never wrap the connecting cable around the base station.
• Protect the device from other heat sources, naked fl ames, sub-zero temperatures, persistent
moisture, wet conditions and impacts.
• Use only original accessories from the manufacturer in order to guarantee that there is no
interference that may prevent the device from working and to avoid possible damage.

Before Initial Use

Clean the device and accessories before you fi rst use them to remove any possible production
residues on the device. To do this, follow the instructions in the "Cleaning and Care" chapter.
EN